国产午夜精品福利,99超碰在线观看超碰在线观看,点击进入av毛片在线,青青草欧美,夜夜操b天天干天天操天天,日日摸夜夜天堂五月亚洲,亚州精品国产三级

客戶榮譽
kehury
技術文章
  • 泰安E-DWT Electronic Deadweight Tester Kits 6531 and 6532
  • 毫歐姆級電阻測量電路設計
  • 使用TDS3000系列數字熒光示波器觀察波形的頻率成分
  • 指針萬用表與數字萬用表的比較
  • 金屬探測儀器對孕婦有無影響?
  • 布氏硬度測量原理、計算公式及應用
  • 簡述球閥與蝶閥的區別
  • 著色滲透探傷
  • 隔爆類儀表的種類
  • 數字萬用表和指針萬用表的選擇及使用技巧
  • 肥城橋云宇橋,金城配件公司
    肥城市北仇傳東機械維修中心
    肥城市誠宇機械制造有限公司
    肥城市大恒凈水設備銷售中心
    肥城市光法暖通設備廠
    肥城市光林農機維修廠
    肥城市華誠工程機械配件公司
    肥城市建鑫預制廠
    肥城市金豆商貿有限公司
    肥城市軍成機械科技機械設備有限公司
    肥城市騰達農機維修部
    肥城市鑫康源機械加工廠
    肥城市興旺冷庫
    肥城市旭博機械加工廠
    肥城市永明工貿有限責任公司
    肥城市宗秀節能設備有限公司
    肥城忠益機械有限公司
    福通礦業電器有限公司
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    公司網站
    哈爾濱軸承有限公司泰安銷售公司
    鴻運鏈條有限公司
    惠通環保設備公司
    濟南和斌機械制造有限公司泰安分公司
    老板:程勇
    老板:范君
    老板:石科新
    老板:王勇
    老板:危勇
    老板:張河
    聯系人:陳鋒
    聯系人:谷繼勝
    聯系人:郝存存
    聯系人:李傳東
    聯系人:劉士棟
    聯系人:劉勇
    聯系人:王保
    聯系人:王秀嬌
    聯系人:王月仙
    聯系人:趙健
    聯系人:趙軍
    魯安肥城陽光實業有限公司
    寧陽金工礦山機械制造有限公司
    寧陽縣華昊萬力化工設備有限公司
    寧陽縣隆彪機械制造有限責任公司
    寧陽縣星昊工程機械銷售處
    寧陽縣勇振機械制造廠
    山東安信機械制造有限公司支護分公司
    山東寶鑫機械設備有限公司
    山東超越重型機械有限公司
    山東德耀機電科技有限公司
    山東鼎鑫礦業工程有限公司
    山東東平宏達機械有限公司
    山東東平小綿羊毛衫銷售店
    山東東岳泰山衡器有限公司
    山東工業裝備公司
    山東國華礦業工程有限公司銷售分公司
    山東海天能源有限公司
    山東皓威礦用材料有限公司
    山東華天宏業塑料有限責任公司
    山東金工機電工業有限公司原寧陽金工礦山機械制造有限公司
    山東金恒利機械制造有限公司
    山東巨能礦山機械有限公司
    山東龍輝起重機械有限責任公司
    山東魯晟節能環?萍加邢薰
    山東明利礦用機械有限公司
    山東寧陽電熱設備廠
    山東歐孚環保設備有限公司
    山東千石網絡技術有限公司
    山東瑞浩機械有限公司
    山東瑞祥起重機械有限公司
    山東省東平縣光大油脂廠
    山東省圣軒商貿有限公司
    山東省泰安鼎鑫礦用設備有限公司
    山東省泰安市岱岳區福通礦用電器有限公司
    山東省泰安市東晟機械制造有限公司
    山東省新泰市鑫達鏈條廠
    山東省新泰市眾泰起重機械有限公司
    山東思科賽德礦業安全工程有限公司
    山東泰安佳瑞建材有限公司
    山東泰安藍景膜技術工程有限公司
    山東泰安山鍋集團銷售總公司
    山東泰安山鍋集團有限公司省外銷售公司
    山東泰安山鍋集團有限公司銷售公司
    山東泰安山口鍛壓有限公司
    山東泰安山口蒸汽鍋爐有限公司
    山東泰安億美達能源科技有限公司
    山東泰恒重工機械有限公司
    山東泰山天盾礦山機械股份有限公司
    山東萬鉑起重機械有限公司
    山東萬榮電氣有限公司
    山東新龍機械有限公司
    山東新煤方舟科技公司
    山東新煤方舟科技有限公司銷售公司
    山東新能礦用機械有限公司
    山東新泰瑞鑫華公司
    山東鑫明利礦山設備有限公司
    山東陽光地質資源科技開發公司
    山東宇進機械有限公司
    山東云匯變壓器有限公司專營店
    山東志康機械設備服務有限公司
    山東中青有色材料有限公司
    山鍋集團原山東泰安山口鍋爐廠
    盛華鍋爐輔機廠
    石油有限公司
    泰安寶鼎機械有限公司
    泰安叉車裝載機銷售有限公司
    泰安宸鴻機械有限公司
    泰安晨星液壓科技有限公司
    泰安鼎鑫礦用器材有限公司
    泰安鋒芒經貿有限公司
    泰安富昌機械有限公司
    泰安光大鍋爐設備有限公司
    泰安哈魯泰軸承有限公司
    泰安漢恩斯機械有限公司
    泰安華健德利爾重型機械有限公司
    泰安家友商貿有限公司
    泰安金星工程機械有限責任公司
    泰安君和金屬材料有限公司
    泰安開發區恒通機械廠
    泰安開發區宏泰礦山機械廠
    泰安隆建工程機械有限公司
    泰安魯班木業機械工貿有限公司
    泰安魯岳工程技術有限公司
    泰安茂豐機械有限公司
    泰安民樂機械公司
    泰安南部壓縮機有限公司
    泰安紐鮑爾機械設備有限公司
    泰安人人咖啡有限公司
    泰安銳泰容器設備有限公司
    泰安瑞源工程機械有限公司
    泰安賽弗工業設備有限公司
    泰安世明礦山機械有限公司
    泰安市安拓機械制造有限公司
    泰安市本川工貿有限公司
    泰安市岱岳區大汶口鎮華辰機械加工廠
    泰安市岱岳區珺峰涂料設備有限公司
    泰安市岱岳區良莊鎮浩宇太陽能銷售店
    泰安市岱岳區龍豪機械加工廠
    泰安市岱岳區山口鎮大地鉆井隊
    泰安市岱岳區祝陽鎮精誠起重液壓設備維修中心
    泰安市鼎鑫礦用軌道交通設備有限公司
    泰安市鼎鑫礦用器械設備有限公司
    泰安市鼎鑫設備有限公司
    泰安市菲塔運動裝備有限公司
    泰安市鋒芒經貿有限公司
    泰安市福通礦用風機風門廠
    泰安市洪海潤滑油有限公司
    泰安市惠強建筑工程攪拌機械公司
    泰安市金三惠教具有限公司
    泰安市金鑫農機有限公司
    泰安市魯通鍋爐設備有限公司
    泰安市魯源商品混凝土有限公司
    泰安市民樂機械有限公司
    泰安市榮凱機械有限公司
    泰安市山城鍋爐有限公司
    泰安市泰山區福朋機械加工廠
    泰安市泰山區富慧貨物配載中心
    泰安市泰山區光正機械廠
    泰安市泰山區宏基機械電器加工廠.
    泰安市泰山區魯通機械廠
    泰安市泰山區三錢化工有限公司
    泰安市泰山區山耐斯氣動液壓元件商行
    泰安市泰山區石科新孫樹強扒雞醬蹄專賣店
    泰安市泰山區思為微電控制設備廠
    泰安市泰山區泰潤機械加工廠
    泰安市泰山區祥興鍋爐銷售中心
    泰安市泰山區鑫勝機械加工廠
    泰安市泰山區星達冷藏廠
    泰安市泰山區星華機械制造廠
    泰安市泰山區興振機械加工廠
    泰安市天成檢測設備有限公司
    泰安市拓恒機械加工有限公司
    泰安市萬力儀表儀器有限公司
    泰安市鑫迪金屬構件廠
    泰安市鑫源(惠能)設備制造有限公司
    泰安市旭泰機械有限公司
    泰安市耀弘商貿有限公司
    泰安市遠大金屬結構有限公司
    泰安市展鴻木工機械有限公司智鴻分公司
    泰安萬坤節能科技有限公司
    泰安維新環保設備有限公司
    泰安祥瑞超聲有限公司
    泰安新泰市永新機械有限公司
    泰安鑫昌機電工業設備制造有限公司
    泰安揚名選煤機械科技有限公司
    泰安易恒機械有限公司
    泰安鈺泰礦山機械有限公司
    泰安澤?機械有限公司
    泰安志發機械有限公司
    泰安卓創自動化科技有限公司
    泰安卓銳機械有限公司
    泰山鍋爐廠
    泰山集團.泰安華電熱工有限公司
    新泰礦業有限公司
    新泰市富悅機械施工有限公司
    新泰市龍廷鎮祥元預制件加工廠
    新泰市龍廷鎮新龍?chǎng)螜C(jī)械廠
    新泰市青云街道立存太陽能熱水器銷售中心
    新泰市泉溝鎮張三帥鉆井隊
    新泰市刃鋒工具有限公司
    新泰市石萊鎮張河電機維修部
    新泰市西張莊鎮振洲礦山機械廠
    新泰市新甫街道裕強機械加工廠
    新泰市新汶云瑞機械加工廠
    新泰市永順機械有限公司
    新泰市正通機械有限公司
    新泰市眾鑫冶煉設備制造廠
    新泰小協宏達農機維修廠
    新泰贏鑫貿易有限公司
    新泰眾泰起重機械有限公司
    羊流有限公司
    振強起重機械有限責任公司
    當前位置:首頁 > 泰安儀器儀表 > 泰安電子電工 > 泰安計量校準
    E-DWT Electronic Deadweight Tester Kits
    型 號:6531 and 6532
    品 牌:美國FLUKE
    技術指標:To RPM4-E-DWT:12 V dc 1.2 A
    泰安E-DWT Electronic Deadweight Tester Kits-6531 and 6532-美國FLUKE

    A powerful, complete hydraulic pressure calibration system to cover a wide workload

    Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

    ·         No weights to load and unload, transport or send out for calibration

    ·         Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature

    ·         No piston-cylinder changes

    ·         No significant sensitivity to level or vibration

    ·         Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration

    ·         Operates in any unit of measure, switching easily from one unit to the next

     The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

    The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers.

    The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi).

    The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface.

    RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly.

    The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi).

    The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available.

    High performance calibration made simple

    Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.

    ·         Pressure ranges available to 200 MPa (30,000 psi)

    ·         ± 0.02 % of reading total one-year accuracy, 0.025 % for two years

    ·         Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort

    ·         Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation

    ·         Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 

    ·         Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium

    ·         AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment

    ·         Optional foot switch accessory allows hands-free data collection when running AutoTests

    ·         Rechargeable battery pack and transport case options for field operation

    General

    Power requirements

    To RPM4-E-DWT:

    12 V dc 1.2 A

    To AC to DC power supply:

    100 V ac to 240 V ac, 50/60 Hz

    Temperature range

    Storage:

    - 20 °C to 70 °C

    Operating:

    10 °C to 40 °C

    Relative Humidity

    Storage:

    0 % to 100 %

    Operating:

    0 % to 70 %

    Weight

    1 Q-RPT:

    12 kg (26 lb) approximate

    2 Q-RPT:

    14 kg (30 lb) approximate

    Dimensions

    E-DWT footprint:

    41.4 cm W x 37.1 cm D (16.3 in x 14.6 in)

    E-DWT height:

    26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height

    Pressure range

    Up to 200 MPa (30k psi), depending on configuration

    Operating medium

    All 6531 and 6532 E-DWT Kits are shipped dry, standard preparation. Can be filled with di-ethyl-hexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil.

    Reservoir capacity

    300 cc (18 in3)

    Variable volume displacement

    3 cc (0.18 in3), 200 MPa (30,000 psi) maximum

    Filling and priming pump displacement

    3.7 cc (0.23 in3)

    TEST pressure connection

    DH500 female, 200 MPa (30k psi) maximum working pressure. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5. Adapter maximum working pressure is 140 MPa (20k psi). Note: DH500 is a gland and collar type fitting for 6 mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc.

    Pressure Limits

    Maximum Working Pressure:

    Range of RPM4-E-DWT monitor’s Hi Q-RPT

    Maximum priming pump pressure:

    700 kPa (100 psi)

    Maximum Working Pressure:

    with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT

    Communication ports:

    RS-232 (COM1, COM2)

    ·

    Pressure measurement

    Warm up time

    15 minute temperature stabilization recommended from cold power up

    Normal Operating Temperature Range

    10 °C to 40 °C (50 °F to 104 °F)

    Resolution

    Default: 0.01 % of active range
    User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange, whichever is larger

    Precision1

    ± 0.018 % of reading or 0.0018 % of Q-RPT span, whichever is greater

    Predicted Stability2

    One year:

    ± 0.0075 % of reading

    Two year:

    ± 0.015 % of reading

    Measurement Uncertainty3

    One year:

    ± 0.02 % of reading or 0.002 % of Q-RPT span, whichever is greater

    Two year:

    ± 0.025 % of reading or 0.0025 % of Q-RPT span, whichever is greater

    ·         1. Combined linearity, hysteresis, and repeatability. Precision does not include stability or calibration reference uncertainty.
    2. Predicted Q-RPT measurement stability limit (k=2) assuming regular use of AutoZero function and short term stability between rezeroing.
    3. Maximum deviation of the Q-RPT indication from the true value of applied pressure including precision, predicted stability with rezeroing, temperature effect from 10 oC to 40 oC and calibration uncertainty (assumes calibration reference uncertainty of ±0.005 % of reading, k=2), combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement.

    型號

    描述

    6531-7M

    E-DWT-H A7M, 0.7 to 7 MPa, 100 to 1,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-14M

    E-DWT-H A14M, 1.4 to 14 MPa, 200 to 2,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-20M

    E-DWT-H A20M, 2 to 20 MPa, 300 to 3,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-40M

    E-DWT-H A40M, 4 to 40 MPa, 600 to 6,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-70M

    E-DWT-H A70M, 7 to 70 MPa, 1,000 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-140M

    E-DWT-H A140M, 14 to 140 MPa, 2,000 to 20,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-200M

    E-DWT-H A200M, 20 to 200 MPa, 3,000 to 30,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-70M

    E-DWT-H A70M/A7M, 0.7 to 70 MPa, 100 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-140M

    E-DWT-H A140M/A14M, 1.4 to 140 MPa, 200 to 20,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-200M

    E-DWT-H A200M/A20M, 2 to 200 MPa, 300 to 30,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    通用配件:


    配件

    描述

    Case

    加固且可重復使用的模制裝運外殼(部件號3338097)

    電池組/充電器

    帶有充電器的12 VDC電池(部件號3071049)

    腳踏開關

    遠程[ENTER]腳踏開關(部件號3070940)

    COMPASS for Pressure

    自動執行測試、數據采集、報告與設備資產管理的軟件

     

    ,
    同類產品
    地址:青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話:0532-86069117 83812497 83821263
    傳真:0532-88786387 網址:m.zhongqili.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號